GS Audio Activator Spray for Cyanoacrylate Transparent | 200ml

Transparent Cyanoacrylate Activator Spray GS Audio | 200ml (glue activator)

This activator is a product designed to promote the speed of action of cyanoacrylate adhesives. It can be applied before and after gluing done with transparent cyanoacrylate to ensure rapid chemical crosslinking and bonding.

Specifications:

• Color: Transparent

• Quantity: 1 spray x 200ml

• Relative density: at 20°C 0.68 ÷ 0.72 g/ml

• Flash point: Inf. 0° C

• Pressure at 20°C: 4/6 bar

• Vapor pressure: 250 hPa (20°C)

• Viscosity 25°C: 0.700 mm2/s

Usage:

Spray the product from a distance of 25-30 cm to avoid the formation of white halos on the surface. The activator ensures fast drying and a smooth, roughness-free finish.

Technical Warnings:

• The presence of white halos after bonding indicates an excess of activator or an application made from too close a distance.

• The formation of holes or micro-holes in the glue indicates excessive application of adhesive in a single pass. In this case, repeat the operation by applying the glue in 2 or more thin layers, activating each layer separately.

Note:The picture is for illustrative purposes only. The supplied product may have a different label than the one shown in the picture. The formulation and technical characteristics remain unchanged.

Product safety:

• Highly flammable aerosol.

• Pressurized container: may explode if heated.

• Causes skin irritation.

• May be lethal if swallowed and penetrates respiratory tract.

• May cause drowsiness or dizziness.

• Toxic to aquatic organisms with long-lasting effects.