Amplifier Cable Reducer Terminals 80 mm² (3/0 AWG) to 50 mm² (0 AWG)

Pair of 80 mm² (3/0 AWG) to 50 mm² (0 AWG) Cable Reducer Terminals for Amplifiers

Pair of adapter terminals for car audio amplifiers, designed to connect large-gauge power or ground cables to terminal blocks with smaller inputs.

The terminal allows for the insertion of cables up to 80 mm² / approximately 3/0 AWG, reducing the connection to the amplifier via a compact 10.4 mm diameter pin, suitable for terminal blocks compatible with an input of approximately 50 mm² / 0 AWG.

Made of brass with a nickel-plated finish, they provide a stable, neat, and cleaner connection compared to a stripped cable inserted directly into the terminal. The screw-type clamping securely locks the cable in place, improving installation convenience in high-power car audio systems.

Key Features

• Cable input: up to 80 mm² / approx. 3/0 AWG

• Output to amplifier: pin Ø 10.4 mm

• Approximate terminal block compatibility: approx. 50 mm² / 0 AWG

• Cable clamping via screw

• Sold in packs of 2

Notes and compatibility

Before purchasing, verify that the amplifier terminal block can accommodate a terminal with a 10.4 mm diameter pin.

Also verify that, once both terminals are installed in the amplifier’s terminal block, the two adapters do not touch each other.

You must leave at least 1 mm of space between one terminal and the other to prevent contact.